■ Accuracy is less than ± 0.5% ■ Pulse rate (K-factor) Is settable ■ Status of Flow rate meter limit output (NO/NC) Is changeable ■ Unit of pulse is selectable (LPP/GPP/KLPP) ■ Power on delay time is settable for Flow rate meter limit output ■ Pulse rate (K-factor) Is settable ■ AT series display unit may be installed in four directions
Specification / 規格
roduct產品
Flow meter
Flow sensor
Model型號
ATS-□□
ATP- □□
ATM-□□
ATW-□□
Operating voltage工作電壓
10 ~ 30VDC
12-24VDC
Current consumption消耗電流
60mA max.
60mA max.
Flow rate meter (LPM)瞬間流量計
0.0 ~ 999.9 LPM (4 digits)
Non
Control output (LPM)控制輸出
Relay
NPN ( 150mA max.)
Non
Flow Total meter (FTM)總流霣計
Non
0 ~ 999999 (6 digits)
Non
Control output (FTM)控制輸出
Non
NPN ( 150mA max.)
Non
Transmitter傳送器
NPN Pulse output
Non
4 ~ 20mA or 0 ~ 5V
4 ~ 20mA or 0 ~ 5V
Communication通訊模式
Non
MODBUS (Optioned)
Non
Non
Approval認證
CE / RoHS
General data /共同規格
Specification規格
Description
Fluid量測流體
Water or Chemical fluid
Accuracy量測精度
± 0.5% of F.S. @ 25°C
Flow velocity最大流速
10 m / s max.
Low cut最小流速
0.3 m / s min.
Operating press.工作壓力
5 kg / cm2
Range ability接管範圍
10:1
Response time反應時間
Real time
Material材質
Paddle : TefzeI ; Body : PP
Operating temperature工作溫度
「PVC」< 50°C/「PP」< 80°C/「PF」< 100°C/「ST」< 120°C
Operating circumstance工作環境
-20°C ~ +80°C ； 35% - 85% RH
Protection class保護等級
IP-65
Approval認證
CE / RoHS
• Guiding of model / 型號索引
KTP- 15- RS-PF-DIN-M12 1 2 3 4 5 6
1
Series 系列
「KTM」/「ATM」=Flow rate Meter with transmitter 「KTP」/「ATP」=Flow rate Meter& Flow total meter 「KTS」/「ATS」=Flow rate Meter rKTW」=Flow Sensor
「DIN」=DIN standard rJISj = JIS standard 「ANSIj = ANSI standard
3
Option
r Non 」= Standard type 「RS」=ICTP series with MODBUS communication 「A」=KTM & KTW series with Transmitter (4 ~ 20mA) 「V」=KTM & KTW series with Transmitter (0 ~ 5V) 「P」=KTW series pulse output only
